Search This Supplers Products:Environment testtensile test machinerubber and plastic testingenvironment chamber testtension machineoptical test
Battery Crush Nail Penetration Test Machine
- group name
- Battery Test Machine
- Min Order
- 1 piece
- brand name
- HUDA Test Machine Manufacturer
- model
- HUD-H212
- Nearest port for product export
- ShenZhen, HK
- Delivery clauses under the trade mode
- FOB, CFR, CIF, EXW, FAS, CIP, FCA, CPT, DEQ, DDP, DDU, Express Delivery, DAF, DES
- Acceptable payment methods
- T/T, L/C, D/P D/A, Cash
- update time
- Mon, 13 Dec 2021 11:51:48 GMT
Paramtents
Inner dimensions 520x450x560mm
Outside dimensions 800x700x1720mm
Drive mode Servo motor drive
Force range 1～20kN
Extrusion stroke 250mm
Material of inner chamber SUS#304, thickness 1.2mm
Packging & Delivery
-
Min Order1 piece
Briefing
Detailed
Battery Crush Nail Penetration Test Machine is suitable for simulating the squeezing and acupuncture of various batteries during use, transportation, storage or disposal under certain temperature conditions. And judging the battery safety performance.
Test Standard
UN 38.3 "United Nations Manual of Transport Tests and Standards for Dangerous Goods"
IEC62133 "Battery (group) composed of batteries and safety requirements for portable equipment"
UL 1642:2012 "Lithium Battery Standard"
GB/T 31485-2015 "Safety requirements and test methods for power batteries for electric vehicles"
GB/T 31241-2014 "Safety requirements for lithium-ion batteries and battery packs for portable electronic products"
Battery should be tested in an environment of 20℃±5℃. Place the battery connected to the thermocouple (the contact of the thermocouple is fixed on the large surface of the battery) in a fume hood, and pierce the largest surface of the battery with a non-corrosive steel needle with a diameter of 2-8mm at a speed of 25mm/s Keep it at the center of the battery for any time and observe the test results.
The battery is qualified as no disintegration, no rupture, and no fire.
Servo motor drive; | |
2. Control method | PLC touch screen control; |
3. Force range | 1～20kN; |
4. Extrusion stroke | 250mm; |
5. Force value display | touch screen display; |
6. Extrusion head | Extrusion head area ≥20cm²; |
7. Extrusion degree | Extrusion pressure reaches 13±0.2kN, keep for 1min; |
8. Test space | 200x200x200mm (width x depth x height) |
9. External material | A3 steel plate and painted, thickness 1.5mm; |
10. Material of inner box | SUS#304, thickness 1.2mm; |
11. Steel needle | φ2mm～φ8mm high temperature resistant steel needle, the length is 100mm (optional); |
12. Inner dimensions | 520x450x560mm (width x depth x height); |
13. Outside dimensions | 800x700x1720mm (width x depth x height, including door lock); |
14. Pressure relief door size | 200x200mm; |
15. Smoke exhaust pipe | diameter φ100mm, located at the back of the box; |
* Safety Alarm Device
Electrical leakage
Over voltage
Overload and over temperature
Over current protection
Abnormal sound and light alarm
Smoke alarm lamp
* Exhaust system
It is equipped with an exhaust fan and an duct at the back of test chamber. There is an air inlet on the left side of the chamber. After the test, the air inlet can be opened to achieve rapid exhaust of the smoke in the chamber.
* Pressure Relief Port
Located at the back of test chamberφ200mm, when the pressure inside of chamber is large, the safety door will be opened automatically, it can release the pressure inside of chamber
Easy to operate
SUS#304, thickness 1.2mm
Explosion-proof glass +
protective steel mesh
