Battery Flammability Test Chamber丨Battery Burning Test Chamber丨Battery Projectile Tester

group name: Battery Test Machine

Min Order: 1 piece

brand name: HUDA Test Machine Manufacturer

model: HUD-H209

Nearest port for product export: ShenZhen, HK

Delivery clauses under the trade mode: FOB, CFR, CIF, EXW, FAS, CIP, FCA, CPT, DEQ, DDP, DDU, Express Delivery, DAF, DES

Acceptable payment methods: T/T, L/C, D/P D/A, Cash

update time: Wed, 29 Dec 2021 08:43:09 GMT

contact supplier

Paramtents

Diameter of test hole 100±2mm
Inner dimensions 750x750x500mm
Outside dimensions 1000x950x1310mm
Control method push-button
Flame time 0~99H99M, can be set

Packging & Delivery

Min Order1 piece

Briefing

Battery burning Test Chamber is suitable for the flame resistance test of lithium batteries (or battery packs)...

Detailed

Battery Burning Test Chamber

Battery Burning Test Chamber is suitable for the flame resistance test of lithium batteries (or battery packs).

Test Standard

UL 1642:2012 "Lithium Battery Standard"

UN38.3(2012) "Recommendations on the Transport of Dangerous Goods-Manual of Tests and Standards" Part III

IEC62133-2012 "Safety requirements for batteries and battery packs containing alkaline or non-acid electrolytes"

GB/T 31241-2014 　 "Safety requirements for lithium-ion batteries and battery packs for portable electronic products"

Features

Operations

Drill a round hole with a diameter of 102mm on an experimental platform, and place a steel wire mesh on the round hole, place the battery under test on the steel wire mesh screen, install an octagonal aluminum wire mesh around the sample, and then ignite The burner heats the sample until the battery explodes or the battery burns out, and the combustion process is timed.

Safety System

* Explosion-proof pressure relief device

* Smoke exhaust device

* Fire extinguishing system

* Electronic door lock system

* Safety stop switch

Parameters

1. Control method	PLC touch screen control;
2. Burner	Bunsen burner, the inner diameter of the tube mouth is 10mm, and the length is about 100mm;
3. Flame application time	0~99H99M, can be set;
4. Diameter of test hole	100±2mm;
5. Test sieve	a sieve made of stainless steel wire woven with a diameter of 0.43mm (0.017inch), containing 20 meshes per inch;
6. The height of the flame from the screen	38mm;
7. Octagonal mesh cover	the distance between each pair of faces is 24" (that is, 610mm), and the eight faces are movable, which is convenient for replacement and disassembly;
8. The height of the octagonal net cover	12" (that is, 305mm);
9. Octagonal cover material	aluminum mesh,composed of 0.25mm diameter aluminum wire woven into a mesh containing 16-18 meshes per inch
10. Material of battery mesh	stainless steel mesh;
11. Combustion gas	methane or liquefied petroleum gas (customer-provided);
12. Inner dimensions	750x750x500mm (width x depth x height);
13. Outside dimensions	1000x950x1310mm (width x depth x height, including door lock);
14. Pressure relief door size	200x200mm;
15. Smoke exhaust pipe	diameter φ100mm, located at the back of the box;
16. Box door	a single door opens to the left, and an explosion-proof chain is installed on the side of the box door;
17. Power supply	1∮, 220V, 50/60Hz, 200W
18. Equipment weight	about 160kg

Details

PLC Touch Screen

Easy to operate

Inner Chamber

Test hole diameter 100±2mm

Octagon Mesh Enclosure

Place samples, diameter 610mm, height 305mm

Exhaust Port + Pressure Relief Door

Relieve pressure and exhaust smoke to assure safe