Battery Drop Weight Impact Testing Machine

group name: Battery Test Machine

Min Order: 1 piece

brand name: HUDA Test Machine Manufacturer

model: HUD-H206

Nearest port for product export: ShenZhen, HK

Delivery clauses under the trade mode: FOB, CFR, CIF, EXW, FAS, CIP, FCA, CPT, DEQ, DDP, DDU, Express Delivery, DAF, DES

Acceptable payment methods: T/T, L/C, D/P D/A, Cash

update time: Mon, 27 Sep 2021 10:24:16 GMT

contact supplier

Paramtents

Weight 9.1kg and 10kg
Height 0-1000mm (can be set)
Impact method free fall
Internal material SUS#304 stainless steel plate, thickness 1.2mm
Control mode PLC touch screen control
Displacement accuracy ≤±5mm

Packging & Delivery

Min Order1 piece

Briefing

Battery impact test machine tests the safety performance of battery by different weights

Detailed

Application

The battery of the test sample shall be placed on a flat surface, and a rod with a diameter of 15.8 ± 0.2 mm (5/8 inch) shall be placed on the center of the sample in a crisscross pattern. A 9.1kg or 10kg weight dropped from a certain height (610mm or 1000mm) onto the sample. When a cylindrical or square battery is subjected to an impact test, its longitudinal axis should be parallel to the plane and perpendicular to the longitudinal axis of the steel column. The longest axis of the square battery is perpendicular to the steel column, and the largest surface is perpendicular to the impact direction. Each battery only accepts one impact test. If the battery does not catch fire, it is qualified if it does not explode.

Standards

UL1642: 2012, UL 2054 "Lithium Battery Standard"

UN38.3 "Lithium Batteries and Battery Pack Testing Standard Regulations"

IEC62133GB/T 18287-2013 "General Specification for Lithium Ion Batteries for Cellular Phones Heavy Object Impact Test"

GB 31241-2014 "Safety requirements for lithium-ion batteries and battery packs for portable electronic products"

GB-31241-2014 "Safety Requirements for Lithium Ion Batteries and Battery Packs for Portable Electronic Products"

QB/T2502 "General Specification for Lithium Ion Batteries"

Main Parameters

1. Weight	9.1kg and 10kg;
2. Height	0-1000mm (can be set);
3. Display	LED meter display;
4. Displacement accuracy	≤±5mm;
5. Impact method	free fall;
6. Control mode	PLC touch screen control;
7. Impact floor material	No. 45 steel, thickness 30 password;
8. Metal rod	15.8±0.2mm (5/8 inch) steel rod;
9. Internal material	SUS#304 stainless steel plate, thickness 1.2mm; Teflon melt adhesive tape is applied to 1/3 of the place, high temperature resistance, corrosion resistance, insulation and easy to clean.
10. External material	cold-rolled sheet baking varnish treatment, thickness 1.5mm;
11. Pressure relief door size	200x200mm;
12. Smoke exhaust pipe	diameter φ100mm, located at the back of the box;
13. Box door	a single door opens to the left, and an explosion-proof chain is installed on the side of the box door;
14. The maximum size of the battery tested	200x200x200mm (width x depth x height);
15. Inside dimensions	490x520x1430mm (width x depth x height);
16. Outside Dimensions	700x1000x1720mm (width x depth x height, including door lock);
17. Impact method	lift the falling ball to a certain height and release it, and the falling ball falls freely in the vertical direction, without tilting or shaking;
18. Power supply	1∮, AC220V, 3A
19. Power supply power	700W
20. Weight (approximately)	about 270kg