Search This Supplers Products:Environment testtensile test machinerubber and plastic testingenvironment chamber testtension machineoptical test
Battery Explosion-Proof Testing Machine丨Dual Anti-Explosion Test Chamber
- group name
- Battery Test Machine
- Min Order
- 1 piece
- brand name
- HUDA Test Machine Manufacturer
- model
- HUD-H203
- Nearest port for product export
- ShenZhen, HK
- Delivery clauses under the trade mode
- FOB, CFR, CIF, EXW, FAS, CIP, FCA, CPT, DEQ, DDP, DDU, Express Delivery, DAF, DES
- Acceptable payment methods
- T/T, L/C, D/P D/A, Cash
- update time
- Fri, 10 Dec 2021 16:54:51 GMT
Paramtents
Inner box size 500x500x500mm
Dimension 680x750x1475mm
External material cold-rolled steel plate with paint treatment, thic
Internal materia SUS#304 thickness 1.2mm
Number of cabinets 2
Control mode metal button control
Packging & Delivery
-
Min Order1 piece
Briefing
Detailed
Battery Explosion-proof Testing Chamber is mainly used for charging and discharging of battery.Put the battery in explosion-proof chamber and connect charge and discharge tester to protect the operator and equipment. The body is made of steel material with strong texture and well explosion protection.
Test Standard
- UN38.3(2012) "Recommendations on the Transport of Dangerous Goods-Manual of Tests and Standards" Part III
- IEC62133-2012 "Safety requirements for batteries and battery packs containing alkaline or non-acid electrolytes"
- GB/T 31485-2015 "Safety requirements and test methods for power batteries for electric vehicles"
- GB31241-2014 "Safety requirements for lithium-ion batteries and battery packs for portable electronic products"
1. Inner chamber size | 500x500x500mm (width x depth x height); |
2. Dimensions | 680x750x1475mm (width x depth x height, including door lock); |
cold-rolled steel plate with paint treatment, thickness 1.5mm; | |
4. Internal material | SUS#304 thickness 1.2mm; |
2; | |
6. Box door | a single door opens to the left, and an explosion-proof chain is installed on the side of the box door; |
7. Teflon tape is attached to the inside of the box, which is effective in insulation and flame retardant, easy to clean; | |
8. There are test holes on the left side of each layer of the box, which is convenient for the test connection line to pass through; | |
9. Each test box has a lighting and smoke exhaust interface, and there is an interval design between each layer to avoid mutual influence on the test; | |
10. Control mode | metal button control ; |
11. Pressure relief door size | 200x200mm; Located at the back of the box, when the sample explodes, the pressure relief port will pop open to relieve the pressure; |
12. Smoke exhaust pipe | diameter φ100mm, located at the back of the box; |
13. Observation window | Two-layer tempered glass with a size of 250x250mm, equipped with stainless steel mesh; |
14. Equipment movement | There are four universal casters at the bottom of the equipment, which can move freely; |
15. Lighting device | It is convenient to observe the state of the tested sample; |
16. Power supply | 1∮; AC220V; 50-60HZ |
Observation Window
Easy to observe the condition of the sample at any time
Inner Chamber
SUS#304 thickness 1.2mm
Double Handle
Silicone compression strip + explosion-proof chain handle
Separate Exhaust & Lighting System