Search This Supplers Products:Environment testtensile test machinerubber and plastic testingenvironment chamber testtension machineoptical test
Programmable Control Rapid-Rate Thermal Cycle Chamber Environmental Test Chamber For phone/ LCD/ watch/ tire/ glass/ car light/automotive part
- group name
- Reliable Test Chamber
- Min Order
- 1 piece
- brand name
- HUDA Test Machine Manufacturer
- model
- HUD-E708
- Nearest port for product export
- ShenZhen, HK
- Delivery clauses under the trade mode
- FOB, CFR, CIF, EXW, FAS, CIP, FCA, CPT, DEQ, DDP, DDU, Express Delivery, DAF, DES
- Acceptable payment methods
- T/T, L/C, D/P D/A, Cash
- update time
- Wed, 07 Jul 2021 15:57:08 GMT
Paramtents
Name rapid-rate thermal cycle chamber
Internal dimension (W*D*H) 400*500*500mm
External dimension (W*D*H) 600*1080*1380mm
Temperature range -40~+150℃
Temperature rise and fall rate 5-15℃/min in average
Temperature uniformity 2℃
Packging & Delivery
-
Min Order1 piece
Briefing
Detailed
Rapid-rate thermal cycle chamber is used to test the performance of materials in various environments and test the heat resistance, cold resistance, dry resistance and humidity resistance of various materials. Suitable for testing the quality of products such as electronics, electrical appliances, mobile phones, communications, meters, vehicles, plastic products, metals, food, chemicals, building materials, medical care, aerospace, etc.
1. To simulate test environment with different temperature and humidity
2. Cyclic test includes climatic conditions: holding test, cooling-off test, heating-up test, moistening test and drying test…
3. Cable port with flexible silicone plug for cable routing to provide the condition of test unit under operation
4. Uncover test unit weakness in a short-term test with accelerated time effect
Model | HUD-E702 | ||
Internal dimension (W*D*H) | 400*500*500mm | ||
External dimension (W*D*H) | 600*1080*1380mm | ||
Temperature range | -40~+150℃ | ||
Temperature fluctuation | ±0.5℃ | ||
Temperature uniformity | 2℃ | ||
Humidity range | 20~98%RH (Refer Image below) | ||
Humidity fluctuation | ±2.5%RH | ||
Humidity uniformity | 3%RH | ||
Temperature rise and fall rate | 5-15℃/min in average (without loading) | ||
Internal chamber material | SUS#304 stainless steel, mirror finished | ||
External chamber material | Stainless steel | ||
Cooling method | Air cooling | ||
Controller | LCD touch screen, programmable control temperature and humidityCan set different parameter for cyclic test | ||
Insulation material | 50mm high density rigid Polyurethane foam | ||
Heater | Explosion-proof type SUS#304 stainless steel fins radiator pipe heater | ||
Compressor | France Tecumseh compressor | ||
Lighting | Heat resistance | ||
Temperature sensor | PT-100 dry and wet bulb sensor | ||
Observation window | Tempered glass | ||
Testing hole | Diameter 50mm, for cable routing | ||
Sample tray | SUS#304 stainless steel, 2pcs | ||
Safety protection device | Protection for leakageOver-temperatureCompressor overvoltage and overloadHeater short circuitWater shortage |
1. High performance and quiet operation (68 dBA)
2. Space-saving designed for flush installation to wall
3. Full thermal break around doorframe
4. One 50mm diameter cable port o left, with flexible silicone plug
5. Accurate wet/dry-bulb humidity measurement system for easy maintain
1. PLC controller for test chamber
2. Step types include: ramp, soak, jump, auto-start, and end
3. RS-232 interface to connect computer for output