Thermal Shock Test Chamber is used to test the bearing extent of the material structures and composite material in an instant and continuous high temperature and extremely low temperature environment, which is in the shortest time to test its thermal expansion and contraction caused by chemical change or physical harm.
Salt spray test can be divided into two kinds: neutral salt spray and acid salt spray. The difference is that the standard is different from the test method, which is called "NSS" and "CASS" test.
Anti-Yellowing aging test chamber can promote the deterioration of sulfur rubber, to calculate the tensile strength and elongation before and after heating rate of change, generally considered to be tested at 70 degrees a day, in theory, equivalent to exposure to the atmosphere for a period of 6 months.
UV Weathering Test Chamber can simulate the sun, rain spray and condensation resulting damage to test the materials by exposure to sunlight with moisture and temperature.
This test machine can get the results of damage after several days or weeks which is equal to expose to outside for a few months. The damages include fading, discoloration, brightness down, powder, crack, blur, brittle, strength decreases and oxidation.
Salt spray test chamber adapted to the surface treatment of various materials, electroplating, organic and inorganic coating, anode processing, anti-rust oil and so on, after these anti-corrosive treatment to test the corrosion resistance of their products.
Walk-in chambers are complex systems that can push the limits of lab space and utilities—CLIMATE works to design a system that suits our clients’ test requirements.
Walk-in chambers are complex systems that can push the limits of lab space and utilities— works to design a system that suits our clients’ test requirements.
Environmental test chamber is an reliable test equipment for all kinds of electronic, electrical, electronics, plastics raw materials and devices to do testing such as cold, heat, moisture, resistance to dry and the quality control
Salt spray test chamber adapted to the surface treatment of various materials, electroplating, organic and inorganic coating, anode processing, antirust oil and so on, after these anti-corrosive treatment to test the corrosion resistance of their products.
1 dust testing machine / dust (dust) test box is mainly used for the shell protection level standards in the IP5X and IP6X two levels of testing.
2 Suitable for sealing performance test and reliability test of the product, check the sealing performance of the electronic and electrical products, automobile, motorcycle parts, seals, etc.
Simulation of high temperature, high pressure, rain environment, suitable for electronic and electrical, aerospace, military and other scientific research units, external lighting, signal devices and automotive lamp casing protection detection.
Walk in chamber is a test chamber for large components, components and finished products,walk in chamber can detect many large and inconvenient objects,such as the whole car,It can be customized according to the needs of users.
UV aging test chamber using ultraviolet light to simulate the sun, but also by condensation or spray the way to simulate the impact of moisture. The equipment is tested by exposing the material to be tested in an alternating cycle of controlled sunlight and moisture while increasing the temperature. The production of UV aging test box using CNC machine tool processing, handsome in appearance, and the use of two-way clamshell, easy to operate.
Salt spray test can assess the material and its protective layer of salt spray corrosion ability, and similar protective layer of the process quality comparison, and can assess the ability of certain products to resist salt spray corrosion.
High And Low Temperature Tensile Test Machine is mainly applied to rubber, plastic profile, plastic pipe, sheet, sheet, film, wire and cable, waterproof membrane, wire and other materials in high temperature or low temperature environment, stretching, compression, Tear, shear and other mechanical properties of the test.
Walk In Dust Chamber is suitable for a variety of auto parts to do dust and dust test, test components include lights, meters, electrical dust cover, steering system, door locks, etc., to verify the product sealing quality.
Environmental test chamber is a test chamber that can be used to simulate different ambient temperatures, to detect the extent of damage to the sample, so as to improve the product.
As everyone knows, the vacuum drying oven is mainly used to dry some materials. Due to the different materials, the drying time and corresponding
The vision measuring machine is a precise geometric measuring instrument. It is a measuring instrument composed of a mechanical main body.
Contact angle is a quantitative measure of wetting of a solid by a liquid.
What does a smartphone experience before mass production?
Universal material testing machine (also called universal tensile testing machine or tensile testing machine
The constant temperature and humidity test chamber can simulate various temperature and humidity environments
Introduction of Universal testing machine (UTM)
Qualified sedimentation is a necessary condition for salt spray test.
Let you know how to use the automatic optical measuring machine.
Recently,we customized a big size of Thermal Shock Test Chamber for our customer...